Begode T4 Fairing

cults3d

Begode T4 Fairing, Front Bumper and Back Handle There is really no need to explain the purpose of a fairing system for the Begode T4. You will fin the files for the side fairings, the front handle/bumper and the back handle/suspension protection. With the back handle you can keep the back lights on the wheel thanks to the grooves I designed for the lights supports and the cables. You can find the pictured Pads Here. To mount the fairing to the wheel use industrial strenght velcro. Same thign for mounting pads to the fairing. To mount the front handle/bumper to the fairing you will need to press in 8 M5 nuts in the fairing in the designed holes BEFORE putting velcro in the front side of the fairing. Then you simply have to put the fairing on the wheel and use 8 M5x12 screws to mount the handle to the fairing. To mount the back handle to the wheel you will need to : 1. Unscrew the 4 backlight and cable support screws (2 on each side) 2. Place the handle on the wheel, it will be aligned in the right place thanks to the groove. Make sure to route the back lights cables in the groove. 3. Put back the original screws in the top row of holes. Yes the screws are long enough 4. Use one M5x16 screw on each side on the bottom hole of the handle