Begode T4 Back Handle & Suspension Protection

cults3d

Begode T4 Back Handle & Suspension Protection This handle will fit on the wheel with stock pads (you will most likely need to cut the back pad a little bit) and my fairing system. This is my take on a back handle and suspension protection for the Begode T4. It adds another anchor point to lift the wheel with.With this handle you can keep the back lights on the wheel thanks to the grooves I designed for the lights supports and the cables. TPU is the perfect material for this application as with different print settings it can be very stiff, yet be able to absorb impacts. It also is in my experience very abrasive resistant. For this design you will need the 4 original screws that the back lights and cable supports use and also 2 M5x16mm screws. You can find the pictured Fairing System Here To mount the handle to the wheel you will need to : Unscrew the 4 backlight and cable support screws (2 on each side) Place the handle on the wheel, it will be aligned in the right place thanks to the groove. Make sure to route the back lights cables in the groove. Put back the original screws in the top row of holes. Yes the screws are long enough Use one M5x16 screw on each side on the bottom hole of the handle