Begode Master Fender (Kuba/Torque Pads Link Compatible)

thingiverse

<strong>2022-12-07: Reworked the Kuba Splash Protector. I noticed some tire rubbing in my Master after doing jumps or stairs and after some investigation it seems that it was the splash protector being pushed down by the linkage so I completely redesign the splash protector, it's now much simpler and will not rub against anything.</strong> A replacement fender for the stock fender on the Begode Master, there are 2 versions available, Stock Link compatible and Kuba/Torque Pads Link compatible, both should be printed in TPU. <strong>Stock Link Version "Master_Fender_Long_Back.stl":</strong> This version is compatible with stock linkage from Begode and replaces the stock fender if you need a replacement for any reason, it's a bit longer than the stock fender so it should thus also give a little bit better protection. If you print and mount this version together Kuba Linkage there will be rubbing against the tire on the back if you do jumps or stairs or similar things that will fully compress the shock so it's not recommended to install this one together with Kuba. <strong>Kuba/Torque Pads Link compatible Version "Master_Kuba_Compatible_Fender_Short_Back.stl":</strong> I'm not a fan of the stock suspension arms on the Begode Master and how easily the Master bottoms out so when I ordered my Master I did so only because the Kuba suspension arms (same as torque pads version) which would also be my highest priority and first upgrade to the Master in combination with a Rockshox shock. The Kuba suspension arms however requires that you either cut the stock metal-fender by 4cm in the back or remove it entirely altogether or else there will be rubbing or worse, instead of doing that I designed a new 3D printed option so that length and function will not be a problem. I compensated the short length in the back by making this version of the fender a bit longer in the front. <strong>Kuba Splash Protector "Kuba_Splash_Protector.stl":</strong> This is an optional addon for the Kuba link arms that you place on the link arms themselves to help with mud splashing up on the shock due to the short length of the fender, it's designed so that it hangs onto the link arms so no adhesive needed.