Bed Leveling Squares

cults3d

This is designed to assist with manual bed leveling. I designed this after manual leveling with paper and still not being level. The way I use this is while it's printing, I can adjust my bed screws where the print is too bulbous or squished. I usually cancel the print by or before the second outer square. Normally I will get two (2) to three (3) passes on each square starting from the outside. The print is natively for a 220x220mm bed but can be scaled up by 140% to cover a proper area for a 300x300mm. Scaling to 150% stretches it to exactly 300x300mm. it can be used with. The line widths are large enough to be printed with a 0.8mm nozzle and a bed at 129x129mm at a 64.5% scale. You get one pass at that point. With a 0.4mm nozzle you can print it down to 53.5% in XY and 100% in Z with 0.2mm nozzle. This gives you a bed of 107x107mm. Native Dimensions: 220x220x3mm When you orient the print on the bed, it may look like it disappears, but it doesn't. At 0.3mm in height it doesn't show till you zoom in to the bed.