Bebop 2 Shock Gear

thingiverse

This is a Landing Gear for the Bebop 2. Using the Stock Mounting Screws. Add 1/16 inch Shock Cord or Light Extension Springs to Achieve a 2 Inch Lift for Deep Grass and Softer Landings. Install Small Wood Screws to Attach Legs to Extensions. These Screws Hold Legs in Place and Act as Pivot Points. Watch the Gear in Action at: https://youtu.be/3bs2jehNKvs Import Legs in mm, Gear Plates in inches. Print Settings: * Printer: da Vinci 1.1Plus * Rafts: No * Supports: Yes * Resolution: .2 or .1 * Infill: 50% or more Notes: **Import legs in mm, gear plates in inches** Design the Shells Thick for Rigidity. Print 4 Legs and 2 Each of the Gear Plates. Print Legs Lying Horizontal Similar to the Picture of the Leg, with the Round Peg Facing the Print Bed, and Supports Along the Long Axis. How I Designed This: Designed to Replace Stock Bebop 2 Landing Gear with Stock Mounting Screws. Remove Stock Landing Gears, Assemble Leg on Gears, Use Shock Cord or Small Lightweight Extension Springs as Needed to Achieve Even Leg Positions.