Bearing mount for Sugar Glider wheel

thingiverse

Designed to create my own wheel for my sugar gliders since I couldn't find one online. There are 2 models. The first is for flat style 5 gallon bucket lids the second is for one that unscrews. Links to lid types below. Parts list: 2 X 5 Gallon bucket lid https://www.homedepot.com/p/Bucket-Companion-5-gal-and-3-5-gal-Screw-Top-Bucket-Lid-in-Black-LD5GRLBK006/303808738 1 X 3ft Gutter Guard https://www.homedepot.com/p/Amerimax-Home-Products-3-ft-White-Snap-In-Filter-Gutter-Guard-86770/100520851 2 X Skateboard bearings. https://www.amazon.com/Bones-Reds-Skateboard-Bearings-pack/dp/B000FDRQ1S/ref=sr_1_6?crid=D46QA0T3GF2P&dchild=1&keywords=skateboard+bearings&qid=1627768752&sprefix=skateboard+be%2Caps%2C212&sr=8-6 1 x 5/16 2.5 inch shoulder bolt. 4 x 5/16 washer 2 X 5/16 fender washer 3 X 5/16 nuts 6 8x32 cap nuts 1st ( 6 x 8x32 x 3/4 inch screws) 2nd (2 x 8x32 x 3/4 inch screws , 4 X 8x32 2 inch screws) Assembly: Stack in the following order on the 5/16 bolt, Washer, bearing, washer, 3D print washer, bearing, washer, then 5/16 nut tighten till there is no slop. Center bearing assemble on 5 gallon bucket lid, and match drill all 6 holes. Using the correct length screws and nut attach bearing to lid. Remove the screen from the gutter guard and remove all of the glue residue. Then trim off the none flat side so the gutter guard is just a sheet of PVC. Remove the seals from the lids. Loop the gutter guard and place in the lid where the seal was removed. Making sure the guard is on the inner edge press the seal back into it's location. Repeat with the other lid.