Bear with Heart - Low Poly

prusaprinters

<p>The little bear who’s got some heart!</p><p>The heart is printed separately and works best in a contrasting color. It’s a very loose fit in the bear’s chest, you can leave it as is and swap the heart with the season, or add a touch of glue to make the love endure.</p><h3>Print Instructions</h3><ul><li><strong>Bear</strong><ul><li>Print as is.</li><li>15% infill is plenty, could probably go 10% and be fine.</li><li>Tested with 0.4 nozzle and 0.2 layer height</li><li>Larger nozzles may struggle with overhangs.</li></ul></li><li><strong>Heart</strong><ul><li>Print upside down, standing on its ends.</li><li>Use 5 or 6mm brim to ensue it stays put.</li><li>Minor cleanup from removing the brim is all that’s needed.</li><li>Tested with 0.4 nozzle and 0.2 layer height</li><li>Larger nozzles may struggle with overhangs.</li></ul></li></ul><p>This is a remix of two clean low-poly designs (linked), I just cleaned up the bear and made room for a little bit of love.</p>