Bear Spray Holder

prusaprinters

<p>Overview</p><p>Riding a bike in the mountains can be fun. &nbsp;In some parts of the world there are bears, so carrying bear spray is a really good idea. BUT - you need to be able to get at your bear spray quickly!</p><p>This design evolved over a couple of seasons. &nbsp;It mounts to the top tube of the bike, is easily and quickly accessed and requires only 1/8 turn to remove. &nbsp;It is self locking and will not come loose in normal situations …. maybe in a crash :-(</p><p>The base is held to the top tube of the bike by velcro and the bear spray can is held to the holder by velcro.</p><p>PETG is the preferred filament either normal or carbon impregnated.</p><p>The holder should be printed with the curved section facing the build plate.</p><p>The base should be printed with the flat side on the build plate.</p><p>For strength 70% infill is suggested.</p><p>For best results both pieces should be printed with supports everywhere. &nbsp;Be sure to carefully clean out the supports where the velcro straps slide through.</p><p>&nbsp;</p>