Beaker XL (BONG) Build a Pype

thingiverse

Welcome to my Build a Pipe Bongs! This is a full-size beaker that works just as well, if not better, than a $200+ glass piece. The neck detaches from the bottom. I've designed percolators that are interchangeable and can be stacked, which I'll eventually upload. Down stem: 18mm glass downstem Bowl: 18mm glass bowl for downstem Rubber O-ring: I'll add the exact size soon, but a few different sizes will work, commonly found at local hardware stores. Bottom beaker orientation: The bottom beaker should sit flat and upright. Beaker neck orientation: Where your lips would go should be on the bottom, and the O-ring groove should face upwards. No supports are needed. To make these pieces operational, simply place a rubber O-ring onto the end of the Neck or Percolator where the groove is located. It's suggested to post-process each piece by sanding, priming, and sealing with food-safe resin for long-term use or use them as disposables. Depending on the O-ring size used, tolerance will vary, but twisting while removing or putting parts together makes it easier. It's suggested to print these designs with food-contact safe filaments like PETG or PLA in natural or clear colors without harmful dyes. If coated and sealed, this would be less of a concern. If you print this design, please share a photo so everyone can see! If you like my designs, feel free to donate! I'll continue to add awesome adapters and improvements as well as new products and designs. Thanks!