BCN3D Sigma E3D v6 Hotend Mount

pinshape

Summary This is a E3D v6 hotend mount designed specifically for the BCN3D Sigma. I still need to provide proper instructions, so bear with me! Let's Get Started Parts Required: E3D v6 Hotends 2 of these http://e3d-online.com/E3D-v6/Full-Kit?product_id=382 Connectors Note that the E3D v6 hotends will not have the correct connectors. It's your responsibility to modify them as needed. The connectors used for the Sigma are: Hotend Connector UK: http://uk.farnell.com/jst-japan-solderless-terminals/pap-04v-s/housing-crimp-receptacle-2mm-4way/dp/1830729, http://uk.farnell.com/jst-japan-solderless-terminals/sphd-002t-p0-5/crimp-socket-24-28awg/dp/1830725 USA: http://www.digikey.com/product-detail/en/jst-sales-america-inc/PAP-04V-S/455-1488-ND/759976, http://www.digikey.com/product-detail/en/jst-sales-america-inc/SPHD-002T-P0.5/455-1313-1-ND/608809 Fans You don't need these, but you can use the stock fans if desired. UK: http://uk.farnell.com/jst-japan-solderless-terminals/phr-2/housing-2way-2mm/dp/3616186, http://uk.farnell.com/jst-japan-solderless-terminals/bph-002t-p0-5s/contact-loose-piece-0-05-0-22mm/dp/3617210 Nuts & Bolts (Total for both extruders) 4x 30MM hex head M3 bolts (To hold the front & back plate) 8x 25mm dome/button hex M3 bolts (To hold the layer fan) 4x 6MM dome/button hex M3 bolts (to hold the layer fan tray) 8x 16MM dome/button hex M3 bolts (to hold the hotend fan) 8x M3 nyloc nuts (to hold the hotend fan) Now it's up to you to assemble this mount. Detailed instructions will follow, I promise. Printing You should print at a 0.1 layer height to get any of the threads correct. The back plate should use 85% infill and the other parts should use 50% infill. Only use support for the layer fan tray Changelog 2016/08/10 - Added pictures of the nuts & bolts and connectors to the description - Updated the links to USA suppliers of the connectors thanks to freddotu