BBR Pancar

thingiverse

This is a full running iteration of my BBR pancar, based loosely around the S280 pan car that was inspired by the Serpent S240. A modified design was created by Ivan Martin, which can be found here: http://myprotorc.blogspot.com/. His design took the S240 and shrunk it down to 102mm wheel base for use alongside the Kyosho Mini-z. Ivan shared his files with me so I could modify them for my own personal use, which I've uploaded here. My design was made using Tinkercad. The top plate is connected using spacers from a stand-off kit found on Amazon. All of the holes found on the underside of the baseplate are countersunk and I used various length countersunk machine screws listed below. The steering knuckles are stock MR-03 knuckles. The mid-mount motor mount is from the Kyosho Mini-Z LM series, and the differential is from PN Racing. The body and nose clip are for the TRP Mosler. The wheels are Kyosho 0 offset alloy wheels. The front lip may need to be trimmed off for certain bodies. The nose clip mounting holes are designed around the PN Racing Carbon Fiber Adapter (CPxxx). Any adapter should work along with ride height spacers. Parts List: Wheels base can be adjusted using Kyosho MR-03 MM and RM T-Plates. 0 8mm Narrow wheels (Front) 0 or +1 11mm Wheels (Rear) MR-02 King Pins and C-Clips Kyosho MR-03 Steering Knuckles Kyosho MR-03 Stock Springs DS-919MG Servo Amazon LU-CC 180Pcs M2 Black Nylon Spacers Hex Nut Screw Stand-off Plastic Accessories Assortment Kit Amazon 304HC Stainless Steel Hex Countersunk Flat Bolts Screws M2x5mm Any Kyosho compatible Mini-z Motor Mount Any Kyosho compatible MR-02/03 Bearing Set Damper disks and springs Various Machine thread 2mm Screws from MR-02/03 Stock Kits UMX Timber Upgrade Lipo Batteries 7.4v 300mAh 35C High Performance All of my progress and projects can be found on my Facebook page: https://www.facebook.com/byebyeracing/.