Bauhaus tray but ... Gridfinity

prusaprinters

I do like the design of Bauhaus tray by AndrzejG, I also like the commonality of Gridfinity system, so here comes this remix of Bauhaus tray and Gridfinity.Features:1 Unit for 42mm x 42mm x 7mm- / us: stackable / unstackable- / mc: single color / multi colorNo supports neededNo MMU or AMS needed for multicolor design SizeStackableMulticolorTrays1x1x3, 2x1x3, 2x2x3 … 4x4x3- / us- / mcPens_holder1x1x6, 2x1x6, 3x1x6usmcMulticolor print hints:If you downloaded the multicolor design, split the model to 2 parts using slicer software as picture shown below. I'm using bambu lab slicer, and if you're using other slicers, the process should be similar. The gap of two parts is 0.2mm, and if your printer is set correctly, maybe glue is not necessary.  我很喜欢AndrzejG 设计的 Bauhaus tray  , 我也很喜欢 Gridfinity 收纳系统，所有就有了这个融合两者的设计特性:1 个单元的尺寸是 42mm x 42mm x 7mm- / us: 可堆叠 / 不可堆叠- / mc: 单色 / 多色不需要支撑多色设计不需要MMU或者AMS之类的设备多色打印提示：如果你下载的是多色设计，在切片机里面把模型分成两片，如图所示。我用的是Bambu的软件，如果你用其他的过程应该也差不多。两个部件的间隙是0.2mm，如果你的打印机设置正确，应该不需要胶水。