Battletech bases
thingiverse
Various styled bases for your 'mechs are available, ranging from the older 1st/2nd Edition to the latest 5th Edition. Additionally, 1/100 scale bases can be used for models and statues or other projects. - Battletech_Base_1and2ed: For older metal Ral Partha/Iron Wind models with a hole for washers/magnets. - Battletech_Base_Plastech: A small flat hex Plastech style base from the 2nd Edition times, featuring a hole for washers/magnets. - Battletech_Base_Plastech_Scenery: Similar to the previous one, but with a single 5mm hole to attach small scenery bits, offering versatility to users. - Battletech_Base_4edTo5ed: This base is designed for adapting half-hex based 'mechs from the 4th Edition (Base game and Alpha Strike) to full-hex 5th Edition. Users may need to sand or file the base slightly since half-hex bases have different sizes depending on model, material, or batch. - Battletech_Base_5ed: A plain full-hex 5th edition style base with a hole for washers/magnets. - Battletech_Base_1-100: Flat hex bases in 1/100 scale for models and statues, featuring holes for washers/magnets. - Battletech_Base_1-100_scifi: 1/100 scale flat hex bases with basic sci-fi decoration, including holes for washers/magnets. - Battletech_Base_1-100_Raised: 1/100 raised plain hex bases in an old style fashion, with holes for washers/magnets. - Battletech_Base_1-100_RaEn: 1/100 raised engraved hex bases in an old style fashion, featuring holes for washers/magnets. Note 1: Third Edition bases were similar to the 5th edition ones but included engraved 'mech model numbers on the front side. They were molded along with the mini, making it easy to use them without assembly when cut off from the sprue. Plastech bases were also molded with the mini. Note 2: The washer/magnet hole is 12mm by 1.6mm (DIN 125 M6 washer). Updated on November 25, 2019
With this file you will be able to print Battletech bases with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Battletech bases.