Battery-operated CUPRA lamp.

cults3d

Original rechargeable battery lamp with CUPRA design. It is designed to charge the battery with a "C" type charger. The device in charge of battery management is a TP4056, which stops charging when it detects that the battery is at maximum. In this case, the battery is a 3800mah 3.7V 18650 with a battery life of about 45min approx with full charge, also, we need a MT3608 to boost the voltage (important to check the output voltage before connecting any element to the output) from 3.7V to 5V since the led strip used is 5V. We also need screws and nuts metric 2.5 and 8mm long to be able to screw the back cover where the switch goes, a switch (I leave link below of all the materials), cable to make the connections and the aforementioned. We recommend having the printer well calibrated and we welcome comments to improve the design and if you have any questions contact me, thank you. [MATERIALS] -5V led strip. https://s.click.aliexpress.com/e/_DFItIPJ -MT3608 voltage booster. https://s.click.aliexpress.com/e/_DETIfDP -TP4056 load module. https://s.click.aliexpress.com/e/_DdgvDJx -18650 battery (this one is 3800mah, you can put a higher one). https://s.click.aliexpress.com/e/_DdKn1eD -Switch to turn off the leds. https://s.click.aliexpress.com/e/_Dm9H0ON -Connectors to attach to switch and remove cover easily. https://s.click.aliexpress.com/e/_DmHroZb -PLA black. https://www.amazon.es/dp/B08LQJ8W1F?psc=1&ref=ppx_yo2ov_dt_b_product_details -PLA copper. https://www.amazon.es/SUNLU-Filamento-Brillante-Impresora-Dimensional/dp/B07V6XJ4MM/ref=sr_1_1?__mk_es_ES=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=3QP1H6KLO4CMJ&keywords=pla+cobre&qid=1705960025&s=handmade&sprefix=pla+cobre%2Chandmade%2C114&sr=1-1 WE ARE NOT RESPONSIBLE FOR ANY INCONVENIENCE THAT MAY OCCUR.