Batman v/s Superman Light

thingiverse

Batman vs Superman Contest Light gives a shadow but it's very large. In the design process, we decided that we're not going for the shade; instead, we focus on making the light an object. Most things can be printed without support. Be aware that some files need support. The design is based on printing it on a 300mm x 300mm bed at 200mm height. Lampshade connectors glue to the lampshade. We did this with our 3D pen, so they're welded together. Choose to print screws; we used metal ones we already had. The holes are for M5 bolts. We use an E27 fitting for lighting, and the two rings clamp it onto the lampshade. The swing arm is printed with support, as well as the swing arm connector. The leg file prints without support; the hinge moment is inside. Printing this with support won't work. Choose different logos at the bottom or on the light itself. Print the ones you like. Good luck printing! Printed with: by Ctrl Design filament 2.85mm Colors: red, iron grey, silver grey, dark blue Design: by Ctrl Design 3D-print: by Ctrl Design