"Batman" Themed Picture Frame

youmagine

I always enjoy receiving photographs of the kids and grandkids, and when I received the latest school photograph of our youngest grandson wearing one of his favorite "super hero" shirts, I decided to create a simple 3D printed picture frame for displaying his photograph on my desk. The single extrusion frame consists of four components: the frame, the frame insert, and two legs. The dual extrusion frame is designed with different colors for each extruder. Both frames are meant for a 65mm wide by 90mm tall photograph displayed at a 15-degree tilt angle. If you need to display a different sized photograph or at a different angle, I've included the Autodesk Fusion 360 file for editing. To make the single extrusion frame, I printed four components at .15mm layer height with 20% infill. After printing, I removed excess material from the edges of the components using small flat and round jewelers files. Next, I glued the legs into the slots in the frame using thick cyanoacrylate glue. Then, I pressed the insert into the front side of the frame and used clear cellophane tape to attach the photograph to the back. To make the dual extrusion frame, I printed two components at .15mm layer height with 20% infill. After printing, I removed excess material from the edges of the slots using a small flat jeweler file. Next, I glued the legs into the slots in the frame using thick cyanoacrylate glue. Finally, I used clear cellophane tape to attach the photograph to the back. That is how I printed and assembled my "Batman" Themed Picture Frame. I hope you enjoyed it! Designed using Autodesk Fusion 360, sliced using Cura 4.4.1, and 3D printed in PLA on an Ultimaker 3 Extended and an Ultimaker S5.