Batman & Joker Pull Ball Chain, Keychain Knob | Handle | Fob | Finials

thingiverse

Pull Ball Chain, Keychain Knob | Handle | Fob | Finials This pull chain for ceiling fan or light is made to work with standard #6 (3.2mm) ball chain and will also fit smaller chains if you use a #6 metal connector. Two great designs by ZTSOUH and ADAM98 need supports touching the build plate, but they clean up easily. To print, feed the chain through the top of the print and attach a standard #6 connector to it. If using a ball chain and metal connector, form a loop around a keyring and hook the other end of the connector onto it. If you don't have a metal connector, you can print the BALL-CONNECTOR.stl file I've included. Note that if you print the connector in PLA, it's a tight fit. Place the chain on a hard surface, position the connector over the last ball of the chain, and push down until it snaps into place. You may also use string with a large knot tied in the end. When printing, I usually use 10% infill - but for ceiling fan applications, you may want to use higher infill for added weight. I've designed hundreds of remixes. If you're looking for something specific, visit my profile on Thingiverse: https://www.thingiverse.com/ToaKamate/about