Batman 700%

prusaprinters

<p>This time my daughter asked for a giant LEGO Batman...with pink cape :) so what could I do. I used LEGO model i found in Grabcad, and modified it for better 3D printing and easier assembly. It is 700% of the original LEGO minifigure size, measures 34cm and 600g (with radio, supports not included)</p> <p>This model was designed to fit quiet tightly together with 0.1-0.2 clearance. If it doesn't work for your printer - step file included (safe pdf file and change format to .stp and should be fine) so feel free to adjust. I can also email you stp file on request.</p> <p>Support required for:</p> <ul> <li>cowl</li> <li>head</li> <li>hips</li> <li>radio (antenna)</li> <li>arms recommended but not mandatory</li> </ul> <p>Bat cape you can find in two versions - clean one that theoretically should be printable with a use of support or second option (I used) with two easy removable ribs to prevent part from wobbling - this is the most challenging part in this assembly. Ribs snap off very easy leaving only a small witness line. GOOD LUCK with this one :) 0.2-0.4 z hop recommended from start to finish.</p> <p>Pins for arms and legs would work better if you use PETG or ABS. I found that PLA pins despite of the initial tight fit get loose very quickly to the point he can't hold his arms raised or even stand still. This is a toy my daughter plays with everyday - if you are looking to print and put out on display you should be fine just with PLA.</p> <p>Logo - has two cone locator just for initial alignment - use superglue. Printed on glass for better gloss effect.</p> <p>Torso - change colour at the level of 21mm to get good looking utility belt.</p> <p>Printer on Creality Ender 3 Pro direct drive, stock magnetic build plate, using PLA from:</p> <ul> <li>3DQF "Daisy's Pink"</li> <li>Basicfil Black</li> <li>ICE "Young Yellow"</li> </ul> <p>all in all it took ~60h to print and 18302 questions "how long do I need to wait dad".</p> <p>HAVE FUN AND HAPPY PRINTING!</p> <h3>Print Settings</h3> <p><strong>Printer Brand:</strong></p> <p>Creality</p> <p class="detail-setting printer"><strong>Printer: </strong> <div><p>Ender 3 Pro</p></div> <p><strong>Rafts:</strong></p> <p>No</p> <p class="detail-setting supports"><strong>Supports: </strong> <div><p>Yes</p></div> <p><strong>Resolution:</strong></p> <p>0,16-0,20</p> <p class="detail-setting infill"><strong>Infill: </strong> <div><p>max 12%</p></div> <p><strong>Filament:</strong> 3DQF, ICE, Basicfil PLA Black, Daisy's Pink, Young yellow Post-Printing =============</p> <p>Remove support</p> </p></p></p> Category: Toys & Games