Batman 2X

thingiverse

I wanted to print characters that are 2 times normal size, I adapted Figurine Remixed from https://www.thingiverse.com/thing:2410047 Doubling up the size and make various tweaks to smooth out some things, changed the hands a bit and a little more support on the arms. (I tried with the Giant versions, but the peg design of the arms make it very hard to assemble when reduced in size, so the one piece arms are better.) Putting on the arms I use a little veg oil on the body holes, the arms will go in with a bit of pressure. I used some White Tape on inside of mask for eyes. Batman Used various items from https://www.thingiverse.com/thing:2267027 utility belts and Cowl(modified to fit) For a wrap around belt on the body start with yellow for 3mm then switch to black Supports are built in, except on the cowl, you should print with some supports for the best results use the JPG of the cape as a pattern to cut out a cape out of black craft foam sheet, or you can convert it into a thin shape to print in 2 or 3 layers flat and then use a blow dryer to shape as you put it on.