batalhao tampa

thingiverse

This object was created with the Customizer app on Thingiverse.com. Here's how to assemble it: You'll need a few things: 1. A small Phillips screwdriver. 2. The ring assembly tool. 3. Your custom gear pieces, which came in the following counts based on what you selected: Object number one requires 7 total parts. Part descriptions are below. Assembling this model can be tricky so make sure to take your time. To start disassembling the piece that's at risk of breaking off and put the main piece together carefully. Make sure the object you want to keep is secured in place while assembling, as these gears have very tight tolerances. Place part A1 in first, with it fully extended, so we don't damage your new ring gear. Instructions: To get this right make sure all of these steps are followed: First thing's first - unscrew all of the screws on each piece. They came loose easily since we loosened them previously. Remove all screws from object number three's assembly using a small Phillips head screwdriver and set aside. Place each ring gear securely around it to ensure that no part goes anywhere while moving or assembling this together carefully so it doesn't get mangled. Carefully take each object, disassemble its screws then gently place onto its new lid so it stays attached tightly when you add the extra screws. Make sure your model will be put back on once you're finished. It's easy as ABC since it can hold any weight. Once done remove carefully. To secure each ring gear place a screw firmly through hole #5 to ensure good grip. Assembling requires careful precision, just keep at this. Next is re-securing each one of the remaining screws by carefully hand tightening while keeping them tight in place but do not overtighten as you're close and all are going onto that special final part. This way we make sure everything stays right in position so it doesn't break when finished!