Base plate for Tardis

prusaprinters

<p>This is a simple base plate for the Tardis created by 23Maple (which was an awesome design). &nbsp;You can see it <a href="https://www.thingiverse.com/thing:367130">here</a>.</p><p>I sized it to print for the original size of 23Maple's design. So if you made that bigger or smaller you need to do the same with this.</p><p>I made a channel through the back that comes out the top middle of the base plate. This is for running a pair of wires through for your light. I used a strip of 5630 12V LED's and cut off a section for this. You can use the adhesive on the strip to lock it down to the base, or hot glue, etc. I used a simple 12V wall wart and a Servalite single pole white light switch I got at Lowes for $3.</p><p>I ran ground straight through the pass thru part of the switch and cut the +12V line and soldered it to the two ends of the switch. So when you turn the dial on the switch the Tardis light turns off and on.</p><p>I designed the base to be a teeny bit loose around the tardis, so it lifts off easy. My goal was to glue down the tardis to it, once the tardis and base have been printed.</p><h3>Print Settings</h3><p><strong>Printer Brand: </strong>Creality</p><p><strong>Printer:&nbsp;</strong></p><p>CR-10S</p><p><strong>Rafts: </strong>No</p><p><strong>Supports: </strong>No</p><p><strong>Resolution: </strong>.20</p><p><strong>Infill: </strong>10%</p><p><strong>Filament:</strong><br>Inland PLA Neon Green</p>