
Base for Raspberry Pi
thingiverse
A simple base for a Raspberry Pi3/4 computer. Has a spot for a 5V 25mm x 10mm cooling fan. The design also includes spacers for use with a Pi proto hat. If a hat is used 3/4" 2-56 mounting bolts should be used. For just the Pi, 1/4" will work. They screw into the mounting posts, which should be tapped. The fan can be powered right from the 5V pin, or controlled by a 2N2222 transistor using a GPIO pin. The standard Pi OS has a dt overlay for this. Just add the following to /boot/config.txt: dtoverlay=gpio-fan,gpiopin=12,temp=52000 Any GPIO pin can be used, 12 is default Temp is in millideg C, default is 55000 There is a 10deg C hysterisis for the fan to go off Pin will be active high. Use a 680ohm resistor from the GPIO to the base of the 2N2222.
With this file you will be able to print Base for Raspberry Pi with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Base for Raspberry Pi.