Bartods Dual Extruder

pinshape

Summary This is Dual Extruder, a project that's making progress. The extruder is up and running, all while keeping costs extremely low. Instructions Here's the list of parts needed: - 2 Motors taken from old 5-1/4 floppy drives (the motor distance apart is 31-32 mm, with a height of 39 mm; they may be taller) - 1 x 12V Fan measuring 40mm by 40mm and standing at a height of 9 mm - 4 Bearings (KG 688ZZ) - each bearing has a diameter of 16mm, an 8mm hole, and stands 5mm tall - 2 Hobbed Bolts (each is an 8mm diameter simple bolt, M8, with a length of 50mm; they come with a 4mm grounded nut to secure the big rack) - 2 M6 Bolts measuring between 35-38 mm long, along with their respective nuts to mount the case - 6 Small bolts for mounting the motors - 2 M6 Bolts, each up to 22 mm in length, paired with a 3-4 mm grounded nut to secure the bearings for clamps - 1 Small M3 Bolt, accompanied by its nut, used to secure a fan