Barenpark Board Lightweight Game Storage Insert

prusaprinters

<p>Barenpark Storage insert, based on a number of google images for inspiration.</p> <p>Goals for this design:</p> <ol> <li>light weight and low (&lt;50g per part) filament use</li> <li>sturdy enough for cardboard games+</li> <li>fast organization for setup</li> <li>speed of print</li> </ol> <p>Print settings for results shown in pictures:</p> <ol> <li>0.28 mm layer height (CHeP magic number height)</li> <li>0 top layers</li> <li>0 bottom layers</li> <li>18% fast honeycomb infill (or similar pattern up to you)</li> <li>2 shells, extrusion width 0.48 mm. Walls are designed exactly at 0.96mm (2x shells)</li> </ol> <p>Result:</p> <p>10-30g per tray, 30mins-1hr per tray, ~136grams for all trays. YMMV based on your print speeds. I aim for no higher than 60mm/sec, outline and infill speeds at 80% of that.</p> <p>For the tile holder:</p> <p>Very thin 1 extrusion width wall at 0.48mm. This turns out plenty strong for this use, just don't be a brute while handling. The internal walls might be a tad too high for 'finger access', please remix if it makes you mad! (I can't remember if I already did this)</p> Category: Toy & Game Accessories