Barebone Supershort and superlight BMG for Mosquito/Crazy hotend with MGN12H mount, dual 5015 fanduct and BLTouch

cults3d

This is a modified version of my previous BMG extruder to reduce filament travel and weight to minimal. You can use original or clone Mosquito hotend, or a Crazy with it. Why is it good? https://youtu.be/2VUYJh1aZfA Mount for MGN12H included. Dual 5015 blower cooling duct included, check your machine before assembly, might collide with your frame. Step files available soon. For heatsink cooler you will need a 4010 blower. You will have to use internal parts(bearing, gears, rods) from a BMG(or spare parts for a BMG). For motor mounting you should use the stock BMG screws. For the mosquito/crazy mounting you will need the stock M2.5 screws. Mounting the fan duct requires 3pcs of M3*10mm screws and an M3 nut. You need to print 2 pieces of the nut holder, place M4 nuts into motor side of the extruder and push it in with the holders. On the other side, you can just slide the nut it. Custom base might be required to use this with your machine. If you want to have the slightly heavier free version: https://cults3d.com/en/3d-model/tool/printed-supershort-distance-bmg-for-mosquito-crazy-hotend If you want to support me, you can do it on the following links: Paypal: https://www.paypal.me/ibruno26 Buy Me a Coffee: https://www.buymeacoffee.com/ibruno26