Barbie Coffee Table

thingiverse

A coffee table for a Barbie dollhouse. The two chairs on the pictures are the excellent [Barbie Jacobsen Egg Chair](https://www.thingiverse.com/thing:2533417) by Deleven. The table was printed on a single extruder Ender 3 printer using a technique from [Make Anything](https://www.youtube.com/watch?v=KV2AjyowXX4). I have modified the technique a little using PrusaSlicer [see the YouTube video](https://youtu.be/qhmDP2tEgyg): 1. Insert the *Barbie Coffee Table.stl* file into PrusaSlicer **and ONLY this file** 2. Instead of inserting the logo in the same way, right-click on the name of the inserted part in the middle right window and select *Add part -> Load* 3. Choose the *Barbie Coffee Table Logo.stl* file and click OK 4. Right-click on the subitem *Barbie Coffee Table*, select *Change type* and set it to *Modifier* 5. Set the *Layer height to 0.2 mm* and tick *Avoid crossing perimeters* under *Print settings -> Layers and perimeters* 6. Set the number of *Loops to 0* and *Brim to 0 mm* under *Print settings -> Skirt and brim* 7. Set *Lift Z to 0.8 mm* under *Printer Settings -> Extruder 1* 8. Slice the model - only the logo should be visible after slicing - and print it 9. Change filament to the desired color for the table itself 10. Right-click on the subitem *Barbie Coffee Table*, select *Change type* and set it back to *Part* 11. Right-click on the subitem *Barbie Coffee Table Logo*, select *Change type* and set it to *Modifier* 12. Slice the model using the same settings as above and print it