Bambu Labs X1 Carbon - Gridfinity Base Plate

prusaprinters

<p>This model has a few design features and is somewhat WIP. Suggestions welcome, but there are only so many hours in the day to work on this.</p><p>Features:</p><ul><li>Deep-pockets a bottom layer - this helps prevent any kind of dropped components from hitting the glass.</li><li>Designed for either flathead screw or magnet mounted gridfinity blocks.</li><li>Recessed finger notch to lift up the glass plate if you need to ventilate the build chamber for PLA prints.</li><li>Cut into 2 pieces for easy printing on a single build plate.</li></ul><p>Print &amp; Build Instructions:</p><ol><li>Select the ‘2D’ version (2 deep) if you have an AMS, or the ‘3D’ version if you do not have the AMS. If you use the AMS with the 3D version, do so at your own risk, you are literally living on the edge and it may fall off.</li><li>Print 1 or 2 dogbone joiner pieces - they are slightly tapered and you may need some finessing if you haven't done any additional tuning from a stock X1's settings.</li><li>Recommend test-fits with any trimming of elephants foot until both pieces mate nicely.</li><li>Use gel super-glue or epoxy to join both pieces together, and then use the dogbone pieces to pull the pieces together&nbsp;</li></ol>