Bambu Lab Purge Bucket - Vase Mode - Parametric

prusaprinters

Here is yet another purge bucket for the Bambu Lab series printers.  This one I designed to be printed in vase mode for super clean printing, no z-seam lines and uniform wall sheen/shine (using settings below).  The 75mm depth requires one to sandwich the purge bucket between the printed and a wall to act as a backstop.  The 150mm depth STL should be deep enough to use without a wall to act as a back stop and have extra volume for multi-color prints.It is also parametric if you need a deeper or narrower version using Fusion 360 and opening the parameters dialog and changing the Depth user variable.Print Settings (0.6mm nozzle recommended)0.6mm NozzleSpiral Vase Mode Enabled0.25mm Layer HeightOuter Wall Line Width = 1.499mmInner Wall Line Width = 1.499mm1 Wall Loop0 Top Layers6 Bottom Layers50mm/s Outer Wall Speed2500mm/s2 Outer Wall AccelerationBrim ONLY if required0.4mm Nozzle0.6mm nozzle recommended so it is more durable/stiffer but it can be printed but should be handled with careSpiral Vase Mode Enabled0.20mm Layer HeightOuter Wall Line Width = 0.999mmInner Wall Line Width = 0.999mm1 Wall Loop0 Top Layers5 Bottom Layers50mm/s Outer Wall Speed2500mm/s2 Outer Wall AccelerationBrim ONLY if required