Bambu Lab Fan Attachment
thingiverse
The housing fan of the Bambu Lab X1 3D printer is glued to the side wall. On arrival of the printer, the fan was loose. So, I decided to design a fan holder to be screwed to the bar where the LED is attached. When installed, the fan holder is completely invisible. Steps: 1. Print the fan holder in ABS or PETG, I used 30% infill. You need to rotate it around the X axis by 180 degrees and use support. 2. Attach 2 M3 nuts with a tape below the top of the fan holder. 3. Detach the fan from the wall. Remove any glue/tape residues from the wall. 4. Unscrew the 3 fan screws on the back of the fan assembly. 5. Attach the fan holder using the 3 screws at the same location. 6. (optional) Attach velcro at the bottom bar. 7. Detach the LED by sliding it a little to the back. 8. Attach the fan holder with 2 M3 screws using the existing holes (going to the taped nuts). 9. Reattach the LED. 10. Done.
With this file you will be able to print Bambu Lab Fan Attachment with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Bambu Lab Fan Attachment.