Balance Grips

prusaprinters

<p>A basic set of slim grips for the AR-15. (And other compatible firearms) The design was created to have a grip angle of 20°; between A2's 25° and Magpul K2's 17° grip angles. In theory, this should allow for most people to have a comfortable grip, whether prone or offhand shooting. Two designs are available, a standard smooth grip, and a ridge textured grip.</p><p>&nbsp;</p><p>Hardware Needed:</p><p>1x Allen Head Screw, 1/4-28 x 1"</p><p>1x Steel Star Washer</p><p>1x Safety Selector Detent</p><p>1x Safety Selector Detent Spring</p><p>&nbsp;</p><h3>Print instructions</h3><p>Print Settings:</p><p>Extruder: 204C&nbsp;<br>Bed: 54C&nbsp;<br>First Layer Print Height: .22mm&nbsp;<br>Standard Layer Height: .18mm<br>Wall Thickness: .40&nbsp;<br>Wall Perimeters: 4<br>Infill: 20% - 32%<br>Infill Pattern: Gyroid<br>Material Flow: 100%<br>Support Material Percentage: 10% (Supports only needed for the bottom part of the grip that raises from the print bed)</p>