Bag Clip 65mminside

thingiverse

Using the following settings: Inside is the default choice for the part. Clip Angle is set to 150 degrees by using the value of 5b_clipAngle = 150. Curvature has been adjusted to 80 with _2c_curvature = 80. The label direction has been selected as forward-facing by choosing 1 from the drop-down menu under 3e_labelDirection. The diameter for the hinge is set to 5 millimeters using _4c_hingeDiameter = 5. Choose a font style: Selecting write/orbitron.dxf under 3b_labelFont results in that choice. Setting the width of the model at 10 millimeters requires using _2b_width = 10. Adjusting label spacing involves choosing 1.1 as shown by 3f_labelSpace = 1.1. Select a font thickness: Label font has been adjusted to -0.3mm by entering 3c_labelThickness = -0.3. Choosing the thickness of the outer wall involves selecting 2.5 from _4a_outsideThickness = 2.5. Adjusting label size has selected an optimal percentage for labeling: With _3d_labelHeightPercent set to 60%, that's what I get. Rotate and position: The default is "230 degrees by entering 5a_hingeAngle". To finish, click the "apply changes" button to create a unique thing. Adjusting hinge gaps: For now, use the given value for a gap size of .1 (five tenths of a millimeter). Customization choices: Set outside dimensions (not inner dimensions) by adjusting outsideThickness and setting it equal to two and a half (2.5). Inside length should be selected to a suitable width based on how much customization needs to happen. Set this number using _2a_length.