BackSplash – Sharpie holder

prusaprinters

Here’s what I learnt making this:1st print failed?So the magnet I choose was about 10mm x 1.5mm, so what went wrong? The tolerance in the print!(The below image is flat because of printer problem and g-code mistake, so I just removed it before it even finished)So giving tolerance value about 0.25-0.5 mm is Worth it!2nd print failed?While increasing the tolerance, the value increased about 1.7mm thinking it was 0.7mm lol!I made a small bridge so that magnet won't  pop out, but it dint work, and magnet didn't fit in the slot- I pause the print and checked if magnet fits well, but there was huge gap in the insert, so just removed the print! (just saved the material & time)3rd print failed?- NopeThe print went well with perfect fit of the magnet without any Problem!Which is the right print file for you (Recommended):I have included 3 files as you can see the below magnet slot designs.1. Capsule insert: The magnet can be dropped inside so the magnet doesn’t come out.2. Circle insert: I had a 10mm x 1.5mm magnet, so the magnet was perfect snap fit.3. No insert: if you have any magnet, you can just get the dimension and make circle insert as per your dimensions.4. Sharpie holder:Adjust the holder according to your own sharpie if needed and just combine it with the base. Dimensions:74mm x 74mm x 23mmPrint Setup:Nozzle diameter  - 0.3mmLayer height         - 0.2mmInfill                       - 20% - 30%Supports               - Not RequiredPrint Time:1hr 10 mins (weigh - 12g)Happy Printing!