Baby Gate Pressure Foot

prusaprinters

<p>I ended up needing to find a couple of pressure feet for a Baby Gate I'd borrowed from my brother to constrain the dogs from getting into my office. &nbsp;<br><br>To that end, I designed something…simplistic…that filled the purpose efficiently.<br><br>It can be printed in pretty much any material, though some are going to be ridiculous, obviously (Say Nylon, PC, PEEK, etc.). &nbsp;PLA works fine as does PETG and ABS. &nbsp;Print both parts. &nbsp;You will want/need a standard ¼ inch bolt and nut, with the length of the bolt being as long as you can find…or need to make spacing right.<br><br>Print both parts. &nbsp;Take the bolt and glue the head of it into the dome shaped part. &nbsp;Take the nut and glue it into the adjuster puck. &nbsp;I used Go2Glue for the build shown in the picture, any suitable glue that bonds to your print and the bolt will do.<br><br>Once set, you have a pressure foot. &nbsp;The nut should be towards the head of the bolt for most situations for maximal strength of the assembly.</p>