axis z supports

thingiverse

Z Axis Artillery Mounts x1. These supports are different from all those you can find here, in fact they allow you to completely embrace the printer and hook between the foot and the carcass. as you can see from the photos it is not necessary to remove the guarantee seal and it is not necessary to drill the casing. be careful only when opening the base from one side, first fix the foot nut with a drop of hot glue, then position the foot and tighten it by inserting the 7mm wrench between the base and the carcass (as in the photo) Site to download files: https://cults3d.com/en/3d-model/tool/stabilizers-zartillery-x1 used material: 2 tubes 56 cm x 16 mm 8 screws 5x15 (upper support) 8 screws 4x15 (hose clamp) 4 screws 5x15 (lower support) 4 screws 4x15 feet printer) between the files there are also 2 washers (thickness) to compensate for the difference in level in the front. P.S. remember to mirror a support on the Slicer.