Axial SCX24 Rock Sliders with penny mounts

thingiverse

These are rock sliders for the Axial SCX24, I have them on my Deadbolt as shown in the pictures. It makes for a great place to hot glue pennies to lower the CoM. If you add pennies you may want to consider installing shock preloads (you can find them on thingiverse ;) I used a 2mm preload on all shocks when I added a total of 16 pennies.) This print is designed to be simple to print, has no overhangs. and no support required. The GCODE outputted by Cura can cause a bit of problems if you have bad bed adhesion. I use a glass bed and no glue and was able to print just fine, but using the Ender 3 Pro magnetic bed caused a bit of trouble. The problem is in the step rails-- the extruder moves to fast to get good adhesion. You could fix this by editing the GCODE or using a different slicer. To install, simply remove the 4 bottom bolts on the frame, and use them to fasten the rock sliders. It should be a simple bolt-on process. Spring pre-loads: https://www.thingiverse.com/thing:4297923