AXA Window Handle Replacement

prusaprinters

<p>This is a replacement window handle for an early 1990's vintage AXA casement window, model unknown. The original became brittle and broke. UV embrittlement?</p> <p>To install this, I had to drill out the original rivet pin holding the handle in place. You'll need to drill the rivet hole in the aluminum handle to 5.5mm (I used a 0.228" drill) to accommodate the snap-fit pins for the new part.</p> <p>Print two pins and one handle. There really isn't a perfect print orientation, you may need to use supports. The pins are designed to snap into place. I used a large slip-joint pliers to snap them in all the way and secure the new handle.</p> <p>I included .3mf, .stl, and Solidworks .prt files for remixing.</p> <h3>Print instructions</h3><p>Unassociated tags: AXA Window, window handle, window lever</p> <h3>Category: Replacement Parts Print Settings</h3> <p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Rafts:</strong> Yes</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.2mm</p> <p><strong>Infill:</strong> 30%</p> <p><strong>Filament:</strong> Prusa PLA Black<br/> <strong>Notes:</strong></p> <p>You may want to use a raft on the press-fit pins. I used support on build plate only for the lever, printed on the large flat surface on the 'top' of the lever.</p>