Awesome Dart Holder for Nerf Gun

thingiverse

Awesome dart holder that gives you an edge in any nerfwar provides easy access to darts. Darts stay tightly secured but can be quickly removed when needed. The dart holder clips securely onto the tactical rail, but slides off easily if switching guns. You will get three different models of this awesome dart holder depending on your ammo needs - six, eight or ten darts :). Make sure you're aware that eight- and ten-dart versions don't fit every gun because the tactical rail may be too small or harder to reach. The six-dart version works always so check the images to see which one I used on my collection. You'll need four screws for installation, preferably using M2.6x8mm Phillips Drive Flat Head Self-Tap Electronic Screws. However, if that's not your thing and there's no handyman around, try using really short and small screws you might have from a computer like those holding your hard drive in place. The holder is pretty tolerant if your screws are slightly too big or small so take a closer look at your house for the right ones. The six-dart and eight- or ten-dart clips should be printed separately, making sure you're printing the correct model of the clips to go with each body part, so be careful about this. Also remember that four screws will make it happen, preferably M2.6x8mm Phillips Drive Flat Head Self-Tap Electronic Screws for ideal results. If you're not very good at this and there is no handyman around to help you then try using really small short screws. Depending on where you live you may be able to find the perfect ones in your computer, they are holding your main board or your hard drive together so give them a look around the house for the right size. The clips of all the holder types come with little arrows next to one side which will tell you which direction this part should go on first before assembly so just be sure and do it that way