avión solar (solar plane)

thingiverse

Material needed: * 2 solar panels, 45x45mm, 5V * 2 Zener diodes, 0.25W * 1 DC motor from a CD-Rom with a 2-wire cable (approximately 40cm) * 1 used pen * 1 used CD * Double-sided tape * 2 € coins * 2 M2 x 15mm screws and nuts * Printed parts See the functionality in the video: https://youtu.be/WG6ORsgYrWs Procedure: * Print the fuselage (duplicated and reflected), attach the two pieces with a screw and nut. * Install the motor inside the fuselage, the long arm to the fuselage, and the short arm to the solar panel support. Both arms connect to the arm support. * Remove the hem of the propeller and insert it into the motor shaft. * Pass the motor cables through the long arm, around the support, and through the short arm to reach the solar plate. * Attach the wing to the fuselage with a screw and nut. * Connect the solar panels in parallel with a Zener diode according to the photo. Place on the support with double-sided tape. * Attach the base to the DVD with double-sided tape or glue. Functionality: * Get sunlight to the solar panels and the solar plane will spin effortlessly.