Automatic Pet Water Bowl Refiller Can 250 - "Drink Up!"

myminifactory

Don't Worry About Your Pet's Water Bowl Anymore! This Simple Model Solves the Problem of Constantly Refilling While Helping the Planet by Recycling! This is My Version of an "Automatic Pet Bowl Refiller." By Recycling a Can, You Create a Helpful, Useful, and Convenient Tool That Your Pets Will Love Too! The Object Is Easy to Print and Attach to the 250mL Can. The Model Uses Minimal Support Which Really Helps When Making This. The "Refiller" Works Flawlessly and Attaches Easily. You Can Put It in Any Dog Bowl with a Flat Bottom (Works Best with Larger Bowls). The Refilling Is Smooth and Effective, Letting Your Pet Get Water Fast and Efficiently. Instructions for Assembly: 1. Apply Some Glue to the Top of the Printed Base Around the Inner Edges. Use Hot Glue or a Glue That's Not Too Liquidy. Make Sure the Glue Will Seal Watertight. 2. Place the Can in the Base with the Open Part Face Down. 3. Add Glue to the Outside of the Can Rim to Reinforce the Can and Add Another Layer of Waterproofness. 4. Let It Dry, and You're Done! Instructions for Use: 1. Fill the Can Up Through the Hole in the Bottom. 2. Fill the Pet Bowl with Around 2 Inches of Water. 3. Quickly Flip the Can Upside Down in the Pet Bowl. 4. (For Your Pet) "Drink Up!" With Some Patience and a Little Glue, You Can Turn a Simple 250mL Can into a Fantastic Household Tool. Print Settings: Material: ABS, PLA, PETG... (No Flexible or Porous Materials Like Wood) Layer Height: 0.2mm or Under Infill Percentage: 50% Wall Thickness: 0.8mm Top/Bottom Thickness: 0.8mm Speed: 60-80mm/s Supports: Yes Raft: Optional Please If You Like This Design, Like and Share It! Comment and Post If You Print This Out for Yourself. I Hope Your Pet Loves It! Thanks!