Auto Bed Leveling for Wanhao Duplicator i3

thingiverse

Auto Bed Leveling for Wanhao Duplicator i3 v2.1 Automated 2017 This consists of just three printed parts, requiring you to rotate the .stl file so they are flat on your printbed. It is designed to replace the stock filament cooler instead of mounting it. Vitamins required: Hitec HS55 9g Micro Servo 1.5mm Steel rod Optical Endstop Included/modified Things and Libraries: 9g_servo http://www.thingiverse.com/thing:70870 Nuts and Bolts: http://www.thingiverse.com/thing:1259672 Parametric Servo Arms: http://www.thingiverse.com/thing:630862 Optical Sensor - Sorry, unable to find the source If you want to see this implemented into Marlin Code: https://www.thingiverse.com/thing:2099172 If you want to modify this, feel free to use the libraries and files in the attached .zip archive If you like or made this thing, please push the equivalent buttons or give me feedback in the comments Have fun and enjoy your life! Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 V2 Rafts: Doesn't Matter Supports: No Resolution: 0.2 mm Infill: 75% Notes: Print it in ABS for maximum durability Post-Printing You may need to adjust the tolerances of the nuts and slider to your needs, possibly requiring a second or third print. Also use a file to smooth the slider, slider-nut, and endstop flag as they are only pushed down by gravity. The servo fits into this spot, if needed you can drill a hole in the servo-mounting post and add a screw to secure the servo. Servo settings here @ my Marlin Setup: Pos.0 = Probe down, Pos.55 Probe Home Used Rod for Probe: Steel rod with 1.5mm diameter