Authentic Fallout Shelter Sign Hueforge

prusaprinters

This is a Hueforge print of an original Civil Defense fallout shelter sign. I scanned my sign, posterized it to reduce it to 3 colors, and then processed it through Hueforge. This is a really easy piece to print, as it only requires 3 colors (Black, orange, and yellow). Since this sign doesn't really take advantage of any special color blending, I sliced it with an 0.16 first layer and a 2mm layer height. I did end up removing the line of text at the bottom of the original sign, because it was too small to be legible at any size. See the 2nd picture for an example of the original sign.I have provided 3 different sizes of sign, with total heights of 150mm, 200mm, and 300mm. I kept the mounting holes used by the original sign, so it should be easy to mount on the wall with tacks.  You may need to slightly enlarge the holes on the 150mm sign, as they are tiny. The 150mm sign prints very cleanly, but the larger 200mm and 300mm signs show more of the surface dirt from the original.Print at 100% infill with a layer height of 0.2mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.56mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.6PLA BambuLab Basic Orange Transmission Distance: 5PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 3 unique filamentsSwap Instructions:Start with BlackAt layer #4 (0.76mm) swap to OrangeAt layer #9 (1.76mm) swap to Yellow for the rest.