Aus3D IR Probe 1.4 Support for Diamond Hotend

thingiverse

This is a Aus3D IR Probe 1.4 holder for the multi-color Diamond hotend with adjustable height. Materials and tools needed: A taper for M3 0.5 to thread holes for the slider and IR probe support Copper wire 1.26 mm in diameter (AWG 16) One M3 .050 x 16 or 20 mm long screw; about 2mm from the head, file a circular groove to lock the screw in place with two pieces of copper wire in small holes on each side of the slider screw Trim wires to surface of holder Two M3 .050 x 8 or 10 mm long screws to secure sensor on holder Place Teflon tape on slider surface for smooth ride and tighten tolerance Print with 0.15 mm layer thickness Use low shrinkage high temperature plastic preferably Ensure no support material gets between gills like space and inside holes Links to z axis probe and multi-color hotend: IR_Probe_1.4: http://wiki.aus3d.com.au/IR_Probe_14 Older version of IR Probe: https://miscsolutions.wordpress.com/mini-height-sensor-board/ Diamond Hotend: https://www.kickstarter.com/projects/wr3d/the-diamond-hotend-single-nozzle-multi-color-3d-pr/posts/1403966 Diamond Hotend wiki: http://reprap.org/wiki/Diamond_Hotend Z-probing from Repetier: https://www.repetier.com/documentation/repetier-firmware/z-probing/ IR Sensor model: http://www.thingiverse.com/thing:1732906/#files Print Settings: Printer Brand: MakerBot Printer: MakerBot Replicator Rafts: Doesn't Matter Supports: Yes Resolution: 0.15 mm Infill: 15-20 % Notes: Use a low shrinkage high temperature plastic preferably.