ATX to SFX PSU Adapter with generic port mounts

prusaprinters

Explicitly made to allow the 10Gtek “M.2 A+E Key 2.5G Gigabit Ethernet Network Card” port to be mounted in an open space, away from the STUPIDLY large RTX graphics cards that insist on taking up more space than their bracket count would have you believe… infuriating.Should fit just about any single VGA or Serial mount for the back of a case.  I tried to give it a lot of wiggle room that worked for my needs and the spare VGA mount I had available (miss you, EVGA!)It comes out to 3mm thick. If you need thinner, just split in the slicer from the flat side - should work fine, even if you aren't comfortable creating or editing 3D stuff, yet. Print DetailsPrinted on a Bambu A1 Mini in the Bambu Labs PETG Basic (black).0.6mm nozzle & 0.3mm layer height - should be 100% fine with 0.4N/0.2Lh4 walls8 top layers6 bottom layers42% Gyroid infill despite this basically being a solid print…Avoid PLA on this one due to temps and weight.  PETG, ABS, and ASA are your friends, here. PETG will do just fine if you have an open-bed printer. M3 bolts are used for attaching the network port or likely anything else you might want.  The SFX/ATX mounts will take some convincing.  I did not feel terribly inclined to adjust them or fit any heat-set inserts. Thanks to @furfoxsake for the clean remix to allow for this remixed remix!  I imported their STL and traced for the basic layout with some minor adjustments.  Full F3D and Step files are available to make your own tweaks.