ATX PSU mount for 2020 profile

thingiverse

Designed to attach an ATX PSU to the top of my 2040-based i3 printer. The dimensions that this was designed to snap-fit are ~86x150mm. The mounting hole will fit M3-M5 (the common 20-series T-nut sizes). You will want 12mm bolts (10mm should work, but don't engage the threads very much). Depending on your print settings, it may grip the PSU tightly-enough to mount it sideways. I've included 3mm holes in the ends of the clips if you feel the need to tie/zip-tie them closed. **The bottom and side have enclosed voids with a single .4mm wall to make it more rigid yet not need supports.** **If your slicer does not print the single wall, you will need to change the external thin wall settings. It will not print nicely without that single wall (or supports, I guess).**