Atreus Keyboard case - multi piece, to fit on smaller print bed.
thingiverse
This is a multi piece Atreus keyboard case I reconfigured into a multi piece print, so that it would fit onto the bed of my Ender 3 pro. I made this with the intention of handwiring, but the original STL was from a case made for the Atreus PCB, so there is a chance it could also work with that. I printed these at .2 resolution with 20% infill. I used M2 hardware, and the holes in the perimeter of the switch plate take 9mm brass standoffs. There are also 10mm dia. indents in the bottom to accept rubber bumpons. The top piece with a Pro Micro holder takes a standard Pro Micro clone, with small tabs on the bottom of the holder that can be melted over to hold the controller in place. There is also a place for a standard 6x5x3.5mm reset switch, and it is held in place by the 'Reset holder'. I currently have it wired with a pro-micro to use the default Atreus QMK firmware, and is able to be setup using the QMK Configurator as well, so it’s really user friendly.
With this file you will be able to print Atreus Keyboard case - multi piece, to fit on smaller print bed. with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Atreus Keyboard case - multi piece, to fit on smaller print bed..