Atomstack Laser X20 A20 S20 Pro cable chain mount with screws and heatsets

thingiverse

Because I didn't like the idea to just clip the mount on the device I made a new one. The mounts are work in progress. I used a 10x20 cable chain to fit the cables and the hose of the air assist: https://www.amazon.de/dp/B08R1LFZTN?psc=1&ref=ppx_yo2ov_dt_b_product_details Used these belt clamps (one especially on the X axis to support the mount as seen in the picture): https://www.thingiverse.com/thing:5180252 You have to redo the cables bacause they will be too short as they are for every cable chain mount. Rotate the X-motor to connect the cable sideways (see the pictures). Material: Y-Axis: 7x M3 heatsets (~4mm outside) 6x M3 screws 3x flathead M3 screws (for the chain) 2x M3 hammerhead nuts X-Axis: 4x M5 buttonhead screws 3x M5 nuts 6x M3 heatsets 6x flathead M3 screws (for the chain) Toolhead: 3x M3 heatsets 3x flathead M3 screws (for the chain) 4x M3 nuts 4x M3 screws Printsettings: Supports: No Layerheight: 0.2 Material: PLA/ABS