ATEM Mini Button Safety Cover

prusaprinters

<p>This is a safety cover for the large buttons on the ATEM Mini line of video switchers.</p><p>Tired of accidentally hitting the Fade To Black button? This solves that issue.</p><p>The hole in the top allows you to still be able to hit the button when needed but prevents accidental presses.</p><p>This is my own model but I combined the designs from a few others I found and adjusted dimensions.</p><p>&nbsp;</p><p>There are 2 versions.&nbsp;</p><p>The regular one fits completely over the button and can be glued in place. Would recommend hot glue but be careful to not let glue ooze onto the button to prevent it from being pressed or release.</p><p>The VHB version is 1.2mm shorter which is the thickness of regular 3M VHB double sided tape. Apply the tape to all 4 sides of the cover, trim to fit and then stick to the ATEM and press firmly. Be careful to place the tape about 1mm from the inside edge of the button hole so that when it it pressed into place it does not squish and touch the button.</p>