Asus TUF Gaming X570-Plus motherboard led diffuser

prusaprinters

<p>Quickly designed a diffuser for the LEDs on the X570 TUF wifi motherboard as they'd shoot straight out of the glass front panel, something I didn't care for. Was happy with how it came out, so I decided to make three different versions and throw them up on here to share.</p><p>3 different versions:</p><p>"Asus_X570tuf_diffuser_thin" is the thin one in the last two pictures that only covers the LEDs, but still lets them reflect on the case. Clips into place.</p><p>"Asus_X570tuf_diffuser_thick" has the same "clip" as the thin one for more support if needed. Should be standard standoff height so it fits snuggly between the motherboard and case.</p><p>"Asus_X570tuf_diffuser_thick_noclip" is shown in the first two pictures. Just has a small edge that works as a stopper so it doesn't slide too far in. This makes it look like there is nothing there looking at the board from the side panel.</p><p>They are all 70mm long.</p><h3>&nbsp;</h3><p><strong>Notes:</strong></p><p>First two pictures are with gyroid infill at .12 resolution. Changing the infill will change the way the leds reflect.</p><p>In the last two pictures, I printed it with 0% infill at .24 resolution.</p><p>If you print it with white filament and 0% infill, it will still work as a diffuser and will show some light. If you print them in black or a dark color, it will block the leds. I printed a black thin one to test, and it worked nicely to have the leds just reflect on the case.</p><p>&nbsp;</p>