Asus ROG Flow X13 Stylus Pen Holder

prusaprinters

The Flow X13 has Windows Ink support and some models come with a stylus, however there is no good way of attaching a stylus and so I embarked on a journey to design one that both is functional and does not detract from the design of the laptop.This stylus pen clip installs into the XG Mobile port. While you can rely on the friction fit, I recommend using some VHB tape to ensure that it does not loosen when removing the pen.Print with the clip oriented down and the two prongs oriented up. A brim may be necessary if bed adhesion is a concern. PLA should be avoided due to the relatively concentrated stress and shear loads coupled with relatively high temperature it may be subjected to. I have printed multiple out of PLA+/HTPLA and PETG without issue.The prongs are slightly offset from the center of the clip. They divide the part into a larger and smaller half. When installing, the larger half is on the keyboard side and the smaller half is on the bottom.EDIT (27 Jun 23): Added .step file