Asteroids Wall Art - Remix print on (PETG-) sheets

prusaprinters

This model is part of my “Printing with PETG on PETG (sheets)” experiments. To print this model, You'll need an sheet of PETG (or other, but the same material as Your filament) to directly print on. How to print this, and what this is all about, please check out my blog post: https://printys.net/2024/05/04/printing-with-petg-on-petg/ Print with PETG, if Your sheet is also PETG.Don't forget to remove the protective film on the top side, before printing. Settings for perimeter and infill don't really matter with this model.Slower printing settings will lead to an better outcome of the model. Printing this won't took long anyway, so no need to use “speed” settings.After printing You can cut along the outer side of the outline. I used a scrollsaw for this, which worked pretty well with the PETG. It then is compatible with my frame / mounting system: https://www.printables.com/de/model/665795-mounting-system-for-wall-art-frames-hanging-and-st And also with the original frame: https://www.printables.com/de/model/501884-wall-art-frame-with-blank-plate/files